National Safety Day – 2026 Theme Engage, Educate & Empower People to Enhance Safety. by Mohd Shams Tabrez Khan HSE. Usia, Dildarnagar, Ghazipur.

 

National Safety Day – 2026 Theme

Engage, Educate & Empower People to Enhance Safety.


1️⃣ ENGAGE

Active Participation in Safety

Involve all people in daily safety activities and decision-making.

• Hazard identification & toolbox talk
• Safety committees with authority
• Reporting near-misses & unsafe acts

Outcome

• Early risk detection
• Improved safety awareness
• Reduced repetition of incidents

Regulatory & Standards

• Factories Act Sec. 41G
• ISO 45001
• OSHA.

2️⃣ EDUCATE

Continuous Learning for Risk Awareness

Structured and ongoing learning helps to build hazard awareness.

• Induction and refresher training
• Job-specific SOP and safety drills
• Learning from incidents

Outcome

• Better risk perception
• Standardised safe work practices
• Fewer human-error incidents

Regulatory & Standards

• Factories Act Sec. 7A / 111A
• ISO 45001
• GMP, NFPA.

3️⃣ EMPOWER

Authority and Capability to Act Safely

Empower and resource people to prevent unsafe acts.

• Stop-work authority policy
• Defined roles and recognition
• Access to PPE and resources

Outcome

• Authority to stop unsafe work
• Strong shop-floor safety culture
• Proactive risk control

Regulatory & Standards

• Factories Act
• ISO 45001
• ESG


Thank you for visiting this website.

For more safety knowledge, professional updates, and EHS awareness articles, stay connected with this platform.

MD Shams Tabrez Khan
EHS (Environment, Health & Safety) Professional
Usia, Dildarnagar, Ghazipur, Uttar Pradesh, India

Safety is not just a rule, it is a responsibility for everyone.

Disclaimer: This blog is only for safety awareness and educational purposes.

Comments

Post a Comment

Popular posts from this blog

Industrial Safety & HSE Blog by Mohd Shams Tabrez Khan sharing practical knowledge about LOTO, Permit to Work, Construction Safety, PPE, Risk Assessment, and Workplace Safety.

Image
  LOCKOUT & TAG OUT (LOTO) PROCEDURE  🔒 What is LOTO? LOTO is a safety procedure used to make sure that equipment is completely shut down and cannot be started again while maintenance or repair work is being done. ⚙️ Meaning: * Lockout 🔐 → Physically locking the energy source (valve, switch, breaker) using a lock * Tagout 🏷️ → Placing a warning tag to show that the equipment must NOT be operated General Requirements for Lockout / Tagout The Person in-charge or Shift in-charge shall be the only authority responsible for controlling and ensuring necessary provisions for providing field hasps, including hasps for electrical lockout. Each plant control room shall maintain a comprehensive procedure for monitoring and controlling field activities through proper documentation and shift-to-shift communication, ensuring that no device remains unnoticed. All hardware used for hazardous energy control must be durable enough to withstand the workplace environment and must be used s...
Read more

LIFTING ACTIVITY. or Lifting Plan Formula, LIFTING PLAN ANALYSIS. by Mohd Shams Tabrez Khan HSE. Usia, Dildarnagar, Ghazipur.

Image
    Lifting Plan Formula :- ·         W: -weight of material=5 Meter    ·         Length of sling=12 Mtr ·         Capacity of sling=10Mt ·         No of sling=02 ·         H=height material to hook ·           T= tension on sling. ·        Height = v (length of sling)2_ 50% of Distance between two hooks ·           T= (Wx L)/ (height x No of sling) ·           Angle of sling- sin-1 H/L. ·           utilization of sling: - Capacity of sling- tension on sling/Capacity of sling X100. ·           % OF Crane capacity utilization total weight of material /crane load chart c...
Read more

Complete Notes on Working at Height and Scaffolding. ( EHS awareness articles, stay connected with this platform.)by Mohd Shams Tabrez Khan HSE. Usia, Dildarnagar, Ghazipur.

Image
  WORKING AT HEIGHT. Work where there is a risk of a fall liable to cause personal injury unless precautions are taken.  OSHA Standards 1926.501 – Duty to provide fall protection 1926.502 – Fall protection systems (PFAS) 1926.503 – Training requirements 1926.451 – Scaffolding safety 1926.1053 – Ladder safety 1926.25 – Housekeeping 1926.200 – Safety signs 1926.1408 – Power line safety General Duty Clause (5(a)(1)) – Safe workplace Understanding Working at Height: Introduction. Falls are the leading cause of deaths in the construction industry. Most fatalities occur when employees fall from open-sided floors and through floor openings Falls from as little as 4 to 6 feet can cause serious injuries and sometimes death. All work above 1.8 m is considered as Working at Height. Working at Height Hazards: Slips, trips, and falls Collapse of scaffolding Improper access and egress Falling from height Falling objects Flying objects Manual handling injuries Contact with overhead ...
Read more