Mohd Shams Tabrez Khan Usia HSE.

  Industrial Safety Nets: Types, Uses, Benefits & Installation Guide  Specifications and rigging instructions for Fall Arrest Safety Nets • Performance: high tenacity netting  • Appeture: 100mm • Diameter: 5mm   • Maximum tensile strength of mesh: 3.20kN   • Colour: Blue, Green • Material: Polypropylene  • UV Additive: 3 Test strips attached for return testing against UV Degregation.   • Certified: YES - all our Fall arrest safety nets come fully certified and tagged.   Intended Use and Scope Safety Nets are used to minimise injury from falls for those working at heights. Typically, type S safety nets (used horizontally) are suspended below the worker. In the event of a slip, trip or fall, the worker is contained within the safety net.   There are other types of safety net which are available:  • Type V - For Suspension from gallows;   • Type U - For side attachment to scaffold;   • Type T - For att...

   Guide to Factory Compliance Registers and Forms under the Factories Act, 1948 and Gujarat Factories Rules, 1963. Form No. Rule Prescribed Under Purpose / Description 1 Rule 3 Application for permission to construct, extend or take into use any building as a factory 1-A Rule 3-C Certificate of stability 1-B Rule 68-1 Format of application to the site appraisal committee 2 Rule 4 Application for registration and grant or amendment of license and notice of occupation 3 Rule 4 and 7 Application for renewal of license 4 Rule 5 License to work a factory 4-A Rule 2(A) Certificate of competency issued to a person or institution 5 Rule 15 Certificate of fitness for young person 6 Rule 23 Humidity Register 7 Rule 17 Record of Lime washing, painting, etc. 8 Rule 54 & 55 (Schedule VI para 5(1)(c)) Register of worker employed for work on or near moving machinery 9 Rule 58 Report of examination of hoists and lifts 10 Rule 60 Report of examination of lifting machines, ropes and liftin...

    Lifting Plan Formula :- ·         W: -weight of material=5 Meter    ·         Length of sling=12 Mtr ·         Capacity of sling=10Mt ·         No of sling=02 ·         H=height material to hook ·           T= tension on sling. ·        Height = v (length of sling)2_ 50% of Distance between two hooks ·           T= (Wx L)/ (height x No of sling) ·           Angle of sling- sin-1 H/L. ·           utilization of sling: - Capacity of sling- tension on sling/Capacity of sling X100. ·           % OF Crane capacity utilization total weight of material /crane load chart c...